Electrofusion is another technique for joining Aquatherm pipes.It requires the use of a coupling that is Winding with heating element wire embedded in PP-Rit slides over both ends of the pipe to be connected.

What is the purpose of an electrofusion processor?

Electrofusion is a method of passing MDPE and HDPE pipes through A controlled electrical current is supplied through an element located within the coupling, which heats itself and fuses to the pipe, creating a thermally bonded connection.

What is electrofusion process?

Electrofusion welding process includes Use Molded Socket Fittings Containing Resistive Heating Coils…then the current is passed through the coil for a preset period of time. Heats the surrounding polymer and transfers the heat to the tube wall.

What is an electrofusion machine?

Electrofusion is A method of joining MDPE, HDPE and other plastic pipes Use special fittings with built-in electric heating elements for soldering the joints together. … Electrofusion welding is beneficial because it does not require the operator to use dangerous or complex equipment.

What is PE welding?

Polyethylene is a « Thermoplastic », which means it can be melted and reshaped by heating. When you weld PE, you are performing fusion welding, which means you are melting the electrode and substrate together.

HDPE ElectroFusion Fittings Installation Instructions | Plasone, USA

21 related questions found

How do I join HDPE?

Hot Meltis the most common method for joining HDPE pipe, which converts the sections of the pipe into a continuous line by heating two pipe ends and pressing them together to form a permanent joint. Fusion creates strong, reliable joints, but the process presents some challenges.

Is HDPE plastic?

What is high density polyethylene? HDPE plastic is the most common and is called HDPE sheet plastic. This thermoplastic is made from a string of ethylene molecules (hence, the polymeric part of polyethylene) and is known for its light weight and high strength.

How to weld HDPE?

simply Heat the HDPE to the correct temperature and then fuse it with another piece It is usually enough to completely weld the two parts together. The trick is that you can’t use a hair dryer to get the right temperature for the process.

What is the fusion welding process?

contact us.fusion welding is A process that uses heat to join or fuse two or more materials to a melting point. The process may or may not require the use of filler material.

How much voltage does a standard electrofusion welder require?

The joints are kept under pressure until cool. Vinidex electrofusion splices require an electrofusion welder that can scan barcodes. The barcode of the accessory contains the fusion parameters needed to successfully complete the fusion process.The power supply should be 240 volts 50Hz, single phase power supply.

What is socket fusion?

Socket welding is A widely used technique for assembling plastic piping systems using injection-molded fittings… The metal sleeve on the other side of the hot plate simultaneously heats the inner surface of the injection-molded fitting. The length of the heated area is the same as the length of the pipe.

What do you use to mark the penetration depth on a socket electrofusion pipe?

Measurement: tape measure or ruler Useful for measuring the insertion (piercing) depth of pipe ends in fittings and checking pipe roundness. Circumferentially wrapped Pi tape for measuring pipe diameters is also useful. Marking: Permanent marking should be visible on the pipe color used.

Can you glue HDPE pipe?

Cracked or Broken HDPE Pipe— Polyethylene glue can be glued Fragments.

What does PE pipe mean?

About sports. polyethylene (PE) is a thermoplastic material polymerized from ethylene. PE plastic pipes are manufactured by extrusion and are available in sizes from ½ » to 63″. PE is available in various lengths as rolled coils or in straight lengths up to 40 feet. … Copper Tube Size Outside Diameter (CTS)

Is PVC pipe cheap?

Perhaps the greatest advantage of using PVC is its relatively cheap nature. Usually, you can get cheap PVC pipe, but the price range depends on the size of the pipe.

Can PE plastic be welded?

Another thermoplastic that is fairly easy to weld is polyethylene (PE). …the most important rule about welding polyethylene is You can solder from low to high, but not high to low. This means that you can weld low density polyethylene (LDPE) electrodes to high density polyethylene (HDPE) sheets, but not vice versa.

What is a fusion splicer?

fusion machine is For connecting plastic pipes and fittings. These tools can be used to join polypropylene, polyethylene, PVDF and ECTFE pipes. The fusion machine heats the ends of pipes and fittings, then presses them together to form a bond. Fusion machines support pipe sizes from 1/2″ to 20″.