In addition to the Mathews Mission series, Mathews bows are designed to be draw length specific, and no setting adjustments are provided. While the Mission Series draw length can be changed with the set screw on the cam, you will need to replace the cam to change the draw length on other models of Mathews bows.

Can the draw length of the bow be adjusted?

The adjustable cam allows the shooter to adjust his or her draw distance using a hex key, in most cases, without pressing the compound bow.Adjustable compound bow cam allows archers to adjust anywhere From 3 inches to 13 inches Depends on the compound bow.

Does Mathews bow stretch long?

absolutely! If you’ve been in this sport for any length of time, you know that they usually run 1/2 the length.

Can you adjust draw length on Mathews SoloCam?

Adjustable draw distance on the bow Cams up to one inch down from maximum stretched length… draw weight Mathews SoloCam bow weight is reduced by 10 lbs from your bow peak weight (eg: if your bow peak weight is 70 lbs, you can adjust it to as low as 60 lbs).

Can you adjust draw length on Mathews V3?

continued until V3 is SwitchWeight technology that allows shooters to adjust draw and draw weight in 5-pound increments, with peak weights ranging from 60 to 75 pounds. Another carryover is the optional Silent Attachment System (SCS), which allows you to quietly attach a bow sling or towline during hunting.

MATHEWS Archery Shop – How to Change the Draw Length of the Bow/Kissing Button

40 related questions found

Is Mathews v3 better than VXR?

v3 and vxr are two good shooting bows. I think the v3 is a smooth bow, but has been stiff. I don’t think you can go wrong, but the v3’s riser length is impressive.

What is the fastest bow Matthews has ever made?

XLR8with a 5″ brace height and 360 IBO, is still the fastest « Mathews » compound bow ever made.

Can you adjust draw length on Mathews Triax?

Triax offers draw lengths ranging from 24.5-30.5 inches, and Adjustable in half-inch increments over this stretch length.

What is the shortest Matthews bow?

this 2020 Matthews VXR 31.5 Bow review

First, the VXR has a wheelbase of 31.5 inches, the shortest bow I’ve ever owned.

Can you adjust the draw length without a bow press?

On most bows, you can do no bow press. However, if the cable is on the module, you will need to press the bow before the module can be replaced. Simply remove the current module by loosening the screws and attach a new module to change the draw distance.

Can you adjust the tightness of a compound bow?

70% should be enough unless the pull is too much for you. On a typical compound bow, the weight can be adjusted to at least some degree. Draw distance is another factor.

Is 70 lbs too much to pull?

For example, a bow with a peak weight of 70 lbs and 80% release would have a hold weight of 14 lbs… being able to fully draw a bow in 30 seconds is great, but if you’re shivering, struggling, and exhausted by the end of that time, you won’t be able to shoot ethically.

Can Mathews vxr adjust draw length?

Both the VXR 28 and VXR 31.5 are powered by an award-winning, efficient and extremely precise cross-center cam system at speeds up to 344 fps.Its SwitchWeight technology allows shooters to change peak pull and Draw weight in 5 pt increments Modules via cams instead of changing limbs.

How to increase the pull of a recurve bow?

In order to increase the pulling force, Tighten the two limb bolts evenly. If you don’t adjust the top and bottom to the exact same amount, you will replace the tillers. To reduce tension, loosen both limb bolts evenly. Remember not to back out the limb bolts beyond the maximum allowable range.

How do I know if my frame is too long?

If the bow arm drops or swings to the side, the draw length may be too long. When this happens, the shoulder blades have pushed the bow arm as far as possible before the arrow is fired. The bow arm has no room to go forward, so it will drop or swing to the side.

How long should my arrow be for a 27″ drawbar?

The weight hangs in the center of the arrow.arrow must be 29 inches long and supported by two points 28 inches apart.

What is the average pull distance?

The farther the recurve and longbow are drawn, the greater the pull.The criteria for determining its tensile weight are taken from 28″ draw distance.

What is the fastest bow on the market?

Here are the 10 fastest new bows on the market in 2020.

• Hoyt Helix Turbo (350 fps) and Hoyt Carbon RX-4 Turbo (350 fps) Hoyt Helix Turbo. …
• Matthews TX-5 (345 fps) …
• Xpedition MX-15 (362 fps) …
• Elite Wu (335 fps)…
• Bear Perception (350 fps)…
• Prime Black 5 (343 fps) …
• PSE Xpedite NXT (360 fps) …
• Bowtech Realm SR6 (352fps)

What is the best bow in history?

Immortalized by the Mongols after the 3rd century, Mongolian recurve bow Widely regarded as one of the most powerful and deadly bows in history. These bows are known for their precise accuracy of fire from over 500 yards (450+ meters) and are often used on horseback.

Is the Matthews Bow worth it?

in my opinion, Matthews is definitely worth the money But my advice is to shoot several makes and models and find the one that works best for you. Sometimes the most expensive is not necessarily the best. Go to the pro shop, get them to fit you and shoot a few bows.