Bypass tray (on the LCT)

1. To replace the paper in the bypass tray, press the action button and remove the paper. …
2. Adjust the bypass tray guides according to the size of the paper to be loaded. …
3. Fully insert the paper into the bypass tray along the bypass tray guide until it stops, then adjust the right guide.

What is the purpose of the bypass tray?

The Bypass Tray, also known as the Multipurpose Tray or Universal Tray, is A tray on the copier that can be used to print jobs on media that cannot be run from the device’s main tray. You can usually find this tray on the side of the unit, sometimes as an optional pop-up drawer.

How to choose the bypass tray?

Printing Using the Bypass Tray on Macintosh

1. Open [Setup] set up.
2. Select paper type [Setup] set up. …
3. make sure [Bypass Tray] selected from [Paper Feed] set up.
4. Slide the bypass tray guides into place according to the paper size.

How do I load paper into the bypass tray?

Loading paper in the bypass tray

1. Open the bypass tray. …
2. Pull out the extension tray for larger size.
3. Move the width guide to the edge of the tray.
4. Bend the sheets back and forth and spread them out, then align the edges of the stack on a level surface. …
5. Load paper in the tray.

Why won’t my printer print from the bypass tray?

Tray 5 (bypass tray) required Load the same paper as the selected document into it. You must also select Tray 5 (Bypass) from Printer Properties and Page Setup. Make sure that the correct paper is loaded in Tray 5 (bypass).

A-Bypass Jailbreak Detection Bypass | How to Tune Jailbreak Detection Bypass with A-bypass | 2021

15 related questions found

How do I choose which tray to print on?

Note: These steps may vary depending on your application.

1. In your application, click File => Print.
2. Click Properties.
3. Click the Basics tab.
4. In the Paper Source drop-down list, select the tray you want to print from.
5. Click Apply => OK.
6. Click OK or Print, depending on your application.

How do I get my printer to print from the bypass tray?

When you return to your computer:

1. Select the file.
2. Select Print.
3. Select Printer Properties.
4. For paper source: select Bypass.
5. For paper type: keep plain paper or choose the appropriate type, eg thick 1 for labels, thick 2 for cards, etc.
6. Click OK.
7. Click Print.

How do I know what type of paper I have?

You can check the type and size of paper loaded interposer on the display on the right [Upper Tray] or [Lower Tray] key. The paper size is automatically detected when paper is loaded.paper type specified in [Inserter(Upper)] or [Inserter(Lower)] Displayed in « Setup Mode ».

How do I change the printer tray settings?

To change the tray settings from the printer control panel:

1. On the printer control panel, log in as an administrator, and then press the Home button.
2. Touch Device > Paper Tray.
3. Choose a tray.
4. To set the restriction level for a tray, touch Tray Mode and select an option.

How do I print to the bypass tray in PDF format?

After you put the paper in the tray, go to your computer and open the document you want to print. Select File…Print (select your printer)…Go to Properties.under Basic tab select paper and set as the bypass tray.

How do I select the tray in Word?

To specify trays in MS Word, the user must:

1. Click File, and then click Print.
2. Click Page Setup in the Print dialog box.
3. In the Page Setup window, click the Paper tab.
4. Select the desired tray for the first and remaining pages.
5. Make sure the same tray is selected in the driver properties.

What does load bypass tray mean?

Use the bypass tray to use OHP transparencies, self-adhesive labels, translucent paper, and Tray cannot be loaded. The maximum number of sheets you can load at the same time depends on the paper type. …for the maximum number of sheets that can be loaded, see Recommended paper sizes and types.

How to disable MP tray Xerox?

Disable tray

1. Right-click a tray in the Trays tab.
2. Click Disable Tray from the Tray drop-down menu.

Where is the bypass tray for Sharp printers?

under Paper Source tab, select the drop-down arrow next to Tray and select the bypass tray. Then select « OK » in the lower right corner of the screen. Now, in the Print window, press OK and the Word document will print from the bypass tray.

Why is my bypass tray not working?

Make sure you are pointing to the bypass tray from the print settings. Make sure to fill the bypass tray after sending the file to the printer. Make sure the user has permission to print from the bypass tray. Make sure your MP tray is activated in the printer parameters.

What does print required resources mean?

After a print job is selected and released, the MFD will display a « resource required » warning, which is a notification You must enter the desired media. …you will need to resubmit the print job, making sure the correct size and type are selected in the application and print driver.

How to edit trays on Mac?

Set Tray Defaults for Mac Drivers

1. Open the file to be printed.
2. Select Print.
3. Select Paper Feed.
4. Choose a specific tray.
5. Save as preset.

How to set up the tray?

1. To configure tray settings, select User Tools/Counters.
2. Select the tray paper settings.
3. There are three screens that allow you to configure the tray settings as needed. …
4. Select Tray 1, and then select OK.
5. Select the tray paper size: Tray 1.

How to print two different paper trays?

Re: Using multiple trays on the same print job

For example, to print from Tray 2, select á That tray is a different color On the printer, and on the Special Pages tab, select the color for the pages to be printed from this tray.

How do I change the printer from Tray 1 to Tray 2?

Right-click your product and select Printing Preferences. From the Printing Preferences menu, select Paper/Quality.Pull down from paper source-down menu, select Tray 2.

How to bypass Xerox Tray 5?

After opening the printer properties, you should see a window similar to the image below.

1. Under Paper, click the drop-down arrow.
2. Select Select by Tray.
3. Select Tray 5 (Bypass)

How do I choose which tray to print from Xerox?

1. On your computer, open Xerox Easy Printer Manager.
2. Select a printer.
3. Click Advanced Settings or Machine Settings.
4. If using Windows, click Device Settings.
5. Select input trays and change settings for each paper source:…
6. If available, for Tray Settings, select the desired option.
7. Click Save.

How do I print labels from the MP tray Xerox?

When the file is opened:

1. Choose File > Print >
2. Select Print Properties >
3. Select the Paper drop-down menu >
4. Select « Other Type »
5. Select « Label » as the type.
6. 6. (Optional) Select Output.
7. Destination drop-down menu > Select.
8. Press OK, > Print.