4. Press and hold the button and turn on the power switch to Apollo Twin – Press and hold the knob/button combination for about 10 seconds until the LEDs on the Apollo Twin front panel stop flashing. 5.

How to activate the Apollo twins?

The following steps will guide you through the process of installing the UAD software, registering Apollo, and authorizing the UAD plug-in.

1. Connect and power the Apollo. …
2. Download the UAD software. …
3. Install the UAD software. …
4. Register your Apollo. …
5. Authorize your Apollo.

Why didn’t my Apollo twins show up?

Apollo Twin Cannot be used by connecting it to the Mini DisplayPort connector. Although Thunderbolt and Mini DisplayPort devices have the same physical connector, these devices use different underlying communication protocols and will not recognize Apollo Twin when connected to Mini DisplayPort.

Should I turn off my Apollo Twin?

System Sleep is compatible with the latest Apollo Thunderbolt software. However, disabled Hibernation is generally recommended when using DAW software.

Can you keep the Apollo twins?

Important: For best results, quit any audio software applications (DAWs) that use Apollo and/or UAD plug-ins before disconnecting Apollo from your computer.It is safe to leave the console and/or The UAD Meter and Dashboard application opens When Apollo is disconnected.

How to set up and record ft. Fab Dupont with Apollo interface and console software

17 related questions found

How many plugins can Apollo Twin run?

The quad will handle approx. Four UAD plugins(maybe another depending on the plugin) This is fine for both tracks until the processing power runs out.

How do I reset the Apollo Twin console?

1. Power off the system and disconnect the Thunderbolt/USB cable from the computer.
2. Hold down the PREAMP, LOW CUT and POLARITY buttons and turn on the Apollo Twin MkII.
3. After all front panel LEDs flash quickly (after a few seconds), release the controls and power off the Apollo Twin.

How do I connect my Apollo twin to my computer?

Set up and connect your universal audio interface

1. Connect the Thunderbolt/USB/Firewire cable from the interface to your computer.
2. Connect power to your connector and turn on the power. The click you hear when opening the interface is just the internal relay. This is completely normal.
3. Turn on your computer.

How do I update my Apollo twins?

How to update the Apollo’s firmware

1. Start the Apollo application.
2. Tap the « Connected » bar on the main screen.
3. Click on « My Apollo »
4. Click on « Firmware Update »
5. Plug your device into the charger.

Is Apollo Twin compatible with Windows?

Important Windows Compatibility Notes

Apollo Twin USB Yes Compatible with 64-bit versions of Windows 7, 8.1 and 10. 32-bit versions of Windows and all older Windows operating systems are untested.

Can you use Apollo Twin without a computer?

Standalone use

While console applications are required to use all Apollo Twin X features, The hardware unit can be used as a digital mixer with limited functionality without Thunderbolt 3 connection to the host computer.

Can Apollo twin be used with FL Studio?

Re: Is FL Studio compatible with UAs Apollo Twin interface? Of course, this is one of the best interfaces you can get. Works absolutely fine with FL.

Will Apollo twin USB work on Mac?

Apollo Twin Compatible with all Apple Mac computers Has an available Thunderbolt, Thunderbolt 2 or Thunderbolt 3 port. For Macs with Thunderbolt 3 via USB-C, a Thunderbolt 3 to Thunderbolt converter is required.

How to install Apollo on Windows?

(Windows) Apollo Thunderbolt Installation, Registration and Authorization

1. Connect and power the Apollo. …
2. Download the UAD software. …
3. Install the UAD software. …
4. Register your Apollo. …
5. Authorize your Apollo. …
6. Configure Windows.

Can you use Apollo Twin Thunderbolt on PC?

Connect the Apollo Twin to the computer

– The host must have One available Thunderbolt 3 port. – Requires a qualified Thunderbolt 3 to Thunderbolt adapter. See this article for details. – UAD devices with Thunderbolt 1 or Thunderbolt 2 connections can be mixed and/or matched.

Why were the Apollo twins orange?

Why is the ring around the preamp knob on my Universal Audio Apollo orange? During normal operation, the ring around the preamp knob on the Apollo is green. When you insert a Unison plug-in on the PREAMP slot of a channel in the Console app, the ring will turn orange.

How do I reset my Apollo Quad?

To factory reset your Apollo, Press and hold both buttons for 10 seconds. The light on the Apollo glows a solid yellow after holding both buttons for 5 seconds… …and then a solid red after holding both buttons for 10 seconds. You can release the button when you see the light on the Apollo turn red.

Does the Apollo twin come with autotune?

It has become the vocal tool of choice in the studio and on stage.Now Auto-Tune Realtime Advanced is included with any new Apollo Twin X Quad or Apollo X4 November 14, 2019 and December 31, 2019.

What plugins does Apollo twin have?

Out of the box, the Apollo Twin MkII offers an incredible set of analog emulation plug-ins, including the world’s only genuine Teletronix LA-2A, 1176LN, Pultec EQand a Unison-enabled UA 610-B tube preamp.

Can I use other plugins with Apollo?

When transferring a used UAD-2 or Apollo device to another user, sellers can choose to include their purchased UAD plugin with transfer. In order to transfer both hardware and plug-ins to the buyer, the seller must submit a transfer request and specify that their additional plug-ins are included.

What did pad do on the Apollo twins?

Upholstered. Enables PAD control to attenuate microphone input signal level by 20 dB.