The 8-point socket is designed for Quick Engage 4 Point Fasteners. They have a highly polished chrome finish. Receptacles range in size from 3/8 to 1 1/4 inches.

What is the use of the 8 o’clock socket?

Snap On’s 8-point, or even a special 4-point socket, is perfect for Square head set screw, Drain pipe of small engine or square head gearbox plug. A set of 8 points isn’t used very often, but it’s handy when you really need it!

What is the point of the socket?

Additional points make these sockets Easier connection with fastener heads. Ideal if you are trying to use fasteners that are hard to see or not visible at all. 12-point sockets are also great for use in tight spaces, as they allow you to connect to fasteners at more angles.

What is the 3/8 socket for?

If your slot bank is limited to one drive size, choose 3/8″ drives to cover most socket you will use. However, the minimum and maximum drive sizes are also very useful. Small 1/4″ driver sockets can sometimes make it easier to access small nuts or bolts in tight spots.

Do they do 4 point sockets?

4 Points – Shock Socket – Ratchet & Socket – Home Depot.

What is an 8-point socket used for

33 related questions found

Do they do square sockets?

Sunex 420ms 3/4″ drive 20mm square impact socket.

What is a tripartite?

Highlights of Triple Square

Triple Square is mainly used for vehicle And can be found in many European vehicles. …you can use them for more important heavy duty vehicles such as drivetrain components and cylinder head bolts.

Which is better, a 6-point or 12-point socket?

If your fasteners are 12 point, which is somewhat unusual, then you must use a 12 point tool. For 6 point fasteners, 6 point tool is Your best choice. Matching the point between the tool and the fastener means you’ll maximize the surface area that contacts the steel, reducing the chance of the tool slipping or failing.

How do I know my socket size?

Drive hole size determination Depending on usage and torque requirements. Common sizes are as follows: 1/4″(6.3mm), 3/8″(9.5mm), 1/2″(12.7mm), 3/4″(19.0mm) and 1″(25.4mm).

Why are the shock sleeves black?

The first is the metal used.Unlike the chrome vanadium finish on most glove sockets, the impact device is Made of Chrome Molybdenumand then carbonized to make them appear black.

Is Gearwrench a good brand?

gear wrench is one of best tool brand You can enter the market. These tools are a favorite among professionals for their excellent performance, high quality, and affordable prices. Most of their tools are very durable and very strong because they are made of chrome alloy steel.

What are the most common socket sizes?

Typically, the most commonly used types are 10mm socket and 36mm socket. Torx Bit Sockets: Torx Bit Sockets come with bits designed specifically for Torx screws and use the same dimensional measurements as SAE sockets. Torx bit sockets are ideal for heavy duty jobs that require extra power and more torque.

Can 12 point sockets be used on Torx bolts?

neither When E-Torx is required, a 6 or 12 o’clock socket will help.

What is a pipe plug socket?

41443. In stock. Female pipe plug receptacles are designed for use with male pipe plug connectors. They can be used in machine screw fasteners, drain plugs, pipe plugs, and more.

What is the standard socket size?

There are four common socket sizes: 1/4″ (0.6 cm), 3/8″ (0.9cm), 1/2″ (1.3cm) and 3/4″ (1.9cm). Also available in intermediate sizes, starting at 1/4″ (0.6cm) and increasing every 16″ (0.16cm).

What are the four-slot drive sizes?

These drive accessories come in four common sizes: 1⁄4″, 3⁄8″, 1⁄2″ and 3⁄4″ (referred to as « drives », such as « 3⁄8 drives »).

What are the wrench sizes in order?

wrench: Standard combination wrench (1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/ 8, 15/16, 1) Metric combination wrenches (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19) Standard flared nut wrenches (3/8, 7/16, 1/2, 9 /16, 5/8, 11/16, 3/4, 7/8) Note: Two sizes can be combined for each wrench.

Do you really need a 12-point socket?

Is this really necessary?Answer: Indeed 12-point socket for most light repairs, but requires a heavy-duty wrench with a six-point socket. Six-point sockets are less likely to slip off stubborn fasteners or go around corners.

What is the 5 o’clock socket for?

Universal impact socket with Impact power tools for loosening and tightening fasteners. They can apply more torque than hand drive tools and have a closed head that installs and grips the entire head of the fastener so the socket doesn’t slip off.

Can you strip the 12-point socket?

As long as you can hold the socket on the nut or bolt head, 12pt socket will not strip the nut or Bolt heads are faster than 6pt sockets. The 12pt socket will give you 6 more positions to start in tight places. Some would say yes, but what about shock sleeves?

Who uses Triple Square?

Common sizes are 6, 8, 10 and 12 mm. Three-way drives are used in high torque applications such as cylinder head bolts and driveline components.Three-way fasteners are commonly found on German vehicles, such as Audi, BMW, Mercedes-Benz, Porsche and Volkswagen. « 

Is there a difference between Star and Torx?

Today, only the Torx company can use the name Torx, but there are also Now « Generic » They have physically identical designs. « Generic » often refers to the design as a star drill or head. The « universal » star should be physically identical to the Torx design.

What is the difference between a star drill and a Torx drill?

The working ends of our star drills are precision machined Fits Torx screws, but the shank of the drill has the signature Chapman length and knurled end. …to answer that question, the Chapman star drill fits Torx screws and Torx bits, but an overall improved design!

Do they make sockets for lag bolts?

Sockets and screwdrivers for lag bolts

try to use Sockets for square head bolt angles. These square sockets or 4 point sockets fit many of the common header sizes we sell. Sockets for square head bolts and square nuts. Bolts and screws are classified by their shank or shaft size.