Where to spread the cost?
Just shake your overhead mic left and right (as far left and right as possible), close your eyes, and hear where you can imagine those drums in front of you.Then pan the individual drums to match where they are in cost.
Where do you put your overhead?
locate them at higher altitudes for a more balanced sound. The farther you place the microphone, the wider your stereo image will become. Wherever you place them, make sure the overhead mic is equidistant from the snare drum. The second technique is the XY configuration.
Where do you put your XY overhead?
XY. The setup is good, it sounds good, Place the microphones immediately above the kit, with one microphone pointing to one side of the kit and one pointing to the other side. Almost forms a « V » shape when done correctly. The biggest advantage of this method is the large phase correlation between the two microphones.
Where can I pan the high hat?
By panning the hi-hat to the sides, everything left in the middle gets more attention, while making the mix feel wider and more rhythmic. For hip hop and electronic tracks, I love pan hats 30–50% from center.
Should I pan the snare?
The basics of panning drums. As you pan the drums, you want to make sure the most impactful elements remain at the heart of the beat.Therefore, I recommend that all kick drums (including 808 kick drums) and The snare drum sounds in the center. In other words, you don’t need to apply any translation to them.
Panning Basics – Warren Huart: Make Like a Pro
18 related questions found
Should I pan my drums?
Are you having a hard time getting your drums to sound broad? Honestly, the difference between mono and stereo drums is incredible.OK pan Makes all the difference and makes listening to your drums feel like you’re actually in the room.
What is a typical drum overhead pickup technique?
This « Sound Recorder » Technology is a close-up overhead technique that attempts to place two microphones equidistant from the snare and kick drums. One microphone is located about 32 inches above the snare drum and points downward, while the other microphone is located above the drummer’s right shoulder and points toward the snare drum.
What is the best ribbon microphone for?
Ribbon microphones are great for drum overhead, capture cymbals without the dazzling hype. Deploying the R88 at a reasonable distance above the drum kit provides a beautiful stereo image of the entire drum kit, and can be combined with a kick drum mic for efficient, minimalist drum recording techniques.
How far should the overhead be from the trap?
They are generally Approx. 32 inches / 0.8 meters away Start with the drum kit so they can capture the « big picture » of the kit. For most mixes, your overhead will be at the heart of the drum sound.
How high should management fees be?
For an even arrival time, you can place the two overhead microphones at two different heights, as low as 2-3 inches or up to 8-10 inches if necessary. This will solidify the central image that is very important to your drum sound.
Do you need the overhead of live drums?
overhead. If overhead costs are required, a Stereo mic pair on the left and right of the kitand isometric from the snare drum, is the most popular technique.
What does the overhead mic do?
Overhead microphones are those used for Recording and live sound reproduction to pick up an overall mix of ambient sounds, transients and instruments.
What does the term overhead mean?
overhead means Ongoing business expenses not directly attributable to creating the product or service. …In short, an overhead is any expense incurred to support a business, but not directly related to a particular product or service.
Are condenser microphones better for vocals?
Condenser microphones are Best for capturing vocals and high frequencies. They are also the preferred microphone type for most studio applications. … Due to the thin diaphragm and increased sensitivity, condenser microphones are often used to pick up delicate sounds. They also need a power supply.
Are Ribbon Microphones Noisy?
Ribbon microphone when paired with a standard preamp May produce excessive noise This makes it difficult to record quieter sources such as vocals, acoustic guitar, and strings.
Are Ribbon Microphones Condenser?
The main difference between a ribbon microphone and a condenser microphone is the ribbon microphone Convert sound by electromagnetic induction, and the condenser is realized by electrostatic principle. Ribbon microphones have a conductive ribbon diaphragm and simple circuitry, while condenser microphones have active capsules and complex circuitry.
Where do you place the condenser mic on the drum?
place Mic 2 to 3 inches from the inside head, a few inches off center. This is the standard way of miking your kick drum if your external heads are off or have a hole cut in them. This position allows you to make sharp attacks from the angle the batter hits the head.
What is pan speed?
Panning is a photographic technique, Combining slow shutter speeds with camera motion Create a sense of speed around moving objects. This is a way to keep the subject in focus while blurring the background. Panning is usually done on objects that move horizontally, such as a moving car or lackey.
How do you pan the kick drum?
How to play the drum
- Determines at which angle the drums were recorded. …
- Place the tom in a stereoscopic picture. …
- Place the hi-hat in the stereo picture. …
- Finally, bring up the kick and snare tracks and keep them in the middle.
How should the drum be struck?
This Snare and kick drums are usually panned up in the middle, and the tom-toms are translated slightly from right to left. Hi-hat cymbals are usually placed to the right of center, cymbals are placed to the left of center, and cymbals are placed from left to right, just like a tom.