The standard size of a fireplace is 2 – 3 feet wide, 24 – 29 inches tall, always about 16 inches deepOf course, openings may vary depending on your style and design philosophy and the location of your fireplace.

How much space does a fireplace need?

You should make sure your fireplace location is At least 36 inches from unprotected walls. If you add a wall protector, you can reduce the gap to 12 inches. There should be a non-combustible extension on the front and sides of the device.

How wide should my fireplace surround?

In general, your total facing width should be At least 1″ wider than the distance between the fireplace legs (C) and the facing height (Facing Leg Height + Facing Head Width) At least ½ inch higher than your interior fireplace height (B). Find the slate color and size combination that meets your needs.

Will the fireplace be too big?

Regardless of heat output or TV size, The fireplace should be sized for the size of the room. A small fireplace can be lost in a large space. Likewise, a large fireplace can overwhelm a small room. However, we are seeing customers getting too small instead of too big.

What is the right height for a fireplace?

Again, the « proper » height is relatively subjective for your fireplace, but an average or standard mantel height structure is About 54” above the bottom of the furnace.

Fireplace Size Guide

19 related questions found

What is the average width of a fireplace?

One 36″ or 42″ fireplace Opening widths are more common, but for typical non-combustible surround and wood fireplaces, you’ll want to assume about 18 inches per side, and for something grander, 24 inches per side. The same goes for the stones on each side.

Can you install a fireplace without a chimney?

Unvented fireplace It can be installed without the need for a chimney, ductwork or any external ventilation to blow fumes out of the home. With this ability, you can basically install a ventless fireplace anywhere in your home.

Can a Fireplace Add to a Home’s Value?

A recent study released by the National Center for Real Estate Research shows that, on average, adding a fireplace Your home will appreciate by 12%! Additionally, nearly 70% of the real estate agents surveyed said they noticed an increase in home value as long as the home had a fireplace.

Are fireplaces valuable?

Having a fireplace won’t hurt your ability to sell your home. … University Teachers’Ton Expect a fireplace to increase the value of your home, but don’t spend a lot of energy and trouble getting rid of it either. If you are an investor in renovating a home, adding a fireplace to an existing building is not worth it.

Where is the best place to put a fireplace?

If you don’t have central heating, consider placing your fireplace in the center, between your dining room and living roomIf your home has an open layout, this type of fireplace creates a welcoming location throughout the home, with the added benefit of keeping both spaces equally warm.

Which is better, wood burning fireplace or gas fireplace?

In the battle for the most efficient fireplace, gas fireplace efficiency The efficiency of a wood fireplace will always win. This is because gas fireplaces burn cleaner and produce fewer polluting emissions.

What kind of fireplace doesn’t need a chimney?

Ventless Gas Fireplace is a subcategory of gas fireplaces. They run on natural gas or liquid propane. They are designed to operate without a chimney or vent.

Why do some houses have chimneys but no fireplaces?

a house without a fireplace has Chimneys for proper discharge of gas or oil-fired equipmentIn some cases, the previous owners of the property sealed the fireplace, leaving the chimney in place because it was part of the structure of the home or was too cumbersome to remove.

How much does it cost to build a chimney and fireplace?

Fireplace and Chimney Installation Costs $2,500 to $11,000, or an average of $6,750. Replacement caps, liners and other repairs can range from $350 to $2,150. Depending on the condition of your chimney and its total number of flues, expect to pay up to $1,000 per year for inspection and cleaning services.

What are the dimensions of an outdoor fireplace?

An outdoor fireplace can be As small as four feet tall, three feet wide, and two feet deep. And the larger fireplace, complete with fireplace and fireplace, built-in seating and wooden storage box, can be 15 feet tall, 15 feet wide and 4 feet deep.

What is the standard depth of a fireplace?

U.S. furnace depth dimensions are 16″ or 20″ As we explain in more detail here. Note that the fireplace extension in front of the fireplace, given at 16″ or 20″, is the minimum size and not the maximum size. More is safer.

Do all houses need chimneys?

As you can see in the article, Your home does need a chimney. It is aesthetically appealing, ensures the durability of the kitchen, and ensures that the house looks clean. When you decide to buy a chimney, it’s best to note that they come in a variety of designs and sizes.

Are chimneys outdated?

The reason your chimney gets worse is because most things wear out over time, and chimneys are certainly no exception. Also, the fact that 2011 furnaces and stoves needed stronger chimneys to support them doesn’t improve, Older chimneys are more or less outdated.

Why do houses have two chimneys?

The flue is a ventilation system and each system needs its own, so if you heat your home with oil or gas With a fireplace, you’ll have two flues. Usually they are in one chimney, so if you look down the chimney it splits into two ventilation systems within one chimney.

Do electric fireplaces need ventilation?

Q – Do electric fireplaces need ventilation? One – No, electric fireplaces do not produce any emissions Therefore ventilation through chimneys, direct vents or other sources such as gas and wood fireplaces is not required.

What is the most effective type of fireplace?

Often hailed as the most efficient type of fireplace, electric fireplace have it all. … they also save you time because, like a gas fireplace, you can enjoy the warmth at the flick of a switch. Electricity does not have an efficient transmission rate like natural gas.

Do Direct Vent Fireplaces Need a Chimney?

Direct ventilation is by far the most common method of ventilation and the newest form of ventilation, invented in the 1980s by the founders of Heat & Glo.It remains a popular choice due to its efficiency, safety, flexibility and the fact that it does not require an existing chimney.

Are wood burning fireplaces cheaper than gas?

According to HomeAdvisor, the average cost of installing a wood-burning fireplace is between $857 and $3,595, while the average cost of a gas fireplace is Between $2,300 and $10,000.

Is it cheaper to run a stove or gas fireplace?

A furnace running at 75,000-100,000 Btu for one hour cost homeowners $1.12-$1.49, according to the national average natural gas prices last month. By comparison, a natural gas fireplace running at 30,000 Btu per hour costs just 45 cents.

What is the average cost to install a wood burning fireplace?

To install a wood-burning fireplace, the average homeowner can expect to pay Between $860 and $3,500according to HomeAdvisor’s true cost guide.